Mubychem Group, established in 1976, is the pioneer manufacturer of Ammonium Bromide, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Ammonium Bromide BP IP ACS Reagent Manufacturers
MSDS of Ammonium Bromide
Ammonium Bromide BP FCC
ACS AR Analytical Reagent Food Grade Manufacturers
Ammonium Bromide
Technical & Pure Crystals
CAS Number 12124-97-9 IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Specifications of Commercial Pure Ammonium Bromide:
Appearance: White Crystals
Assay: 98.5% min (also offered 99.5% min)
Loss on Drying: 0.5%
PH of 5% aqueous solution: 4.5 to 6
Arsenic(as As): 3ppm max
Ammonium Bromide BP Ph Eur Grade Specifications
NH4Br - 97.9 - CAS Number 12124-97-9
Ammonium Bromide
DEFINITION
Content
Ammonium Bromide 98.5 per cent to 100.5 per cent (dried substance).
CHARACTERS
Appearance
Ammonium Bromide is white or almost white, crystalline powder or colourless crystals,
hygroscopic.
Solubility
Freely soluble in water, sparingly soluble in alcohol. It becomes
yellow when exposed to light or air.
IDENTIFICATION
A. It gives reaction of bromides.
B. 10 ml of solution S (see Tests) gives the reaction of ammonium salts.
TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water
prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of
solution
Solution S is clear and colourless.
Acidity or
alkalinity
To 10 ml of solution S add 0.05 ml of methyl red solution.
Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M
sodium hydroxide is required to change the colour of the indicator.
Bromates
To 10 ml of solution S add 1 ml of starch solution, 0.1 ml of
a 100 g/l solution of potassium iodide and 0.25 ml of 0.5 M
sulphuric acid and allow to stand protected from light for 5 min.
No blue or violet colour develops.
Chlorides
Maximum 0.6
per cent.
Iodides
To 5 ml of solution S add 0.15 ml of ferric chloride solution
and 2 ml of methylene chloride. Shake and allow to separate. The
lower layer is colourless.
Sulphates
Maximum 100 ppm.
Iron
Maximum 20 ppm.
Magnesium and
alkaline-earth metals
Maximum 200 ppm, calculated as Ca
Heavy metals
Maximum 10 ppm.
Loss on drying
Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at
100-105C
Sulphated ash
Maximum 0.1 per cent, determined on 1.0 g.
Ammonium Bromide ACS Reagent Grade Specifications
NH4Br
Ammonium Bromide
Formula Weight 97.94
CAS Number 12124-97-9
REQUIREMENTS
Assay: 99.0%
NH4Br
pH of a 5% solution: 4.5-6.0 at 25C
MAXIMUM ALLOWABLE
Residue after ignition: 0.01%
Bromate (BrO3): 0.002%
Chloride (Cl): 0.2%
Iodide (I): Passes test
Sulfate (SO4): 0.005%
Barium (Ba): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Ammonium Bromide BP ACS FCC Food grade manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Ammonium Bromide Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
28-Apr-2022