Mubychem Group, established in 1976, is the pioneer manufacturer of Hydrated Slaked Lime or Calcium Hydroxide, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Calcium Hydroxide BP USP ACS Analytical Reagent FCC Food grade Manufacturers
MSDS of Calcium Hydroxide BP USP IP FCC ACS Analytical Reagent Food grade Manufacturers
Calcium Hydroxide
Technical & Pure Slaked Lime, Hydrated Lime
CAS Number 1305-62-0 IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Specifications & Grades of Hydrated Lime or Slaked Lime or Calcium Hydroxide:
Grades A1++ A+ A % of available lime as Ca(OH)2 96±1 +93 +90 Active CaO(%) +72.5 +70 +68 Acid insolubles (max.)% 0.1 0.4 1.0 Iron 150 PPM 250 PPM In traces Alumina In traces In traces In traces Magnesia as MgO (max.)% 0.5 0.6 1 Mesh (BSS) 500 350 250 Calcium Hydroxide BP Ca(OH)2
Calcium Hydroxide BP Ph Eur Grade Specifications
Ca(OH)2 ... 74.1
Preparation
Calcium Hydroxide SolutionDEFINITION
Content
95.0 per cent to 100.5 per cent.CHARACTERS
Appearance
White or almost white, fine powder.
Solubility
Practically insoluble in water.IDENTIFICATION
A. To 0.80 g in a mortar, add 10 ml of water R and 0.5 ml of phenolphthalein solution and mix. The suspension turns red. On addition of 17.5 ml of 1 M hydrochloric acid , the suspension becomes colourless without effervescing. The red colour occurs again when the mixture is triturated for 1 min. On addition of a further 6 ml of 1 M hydrochloric acid and triturating, the solution becomes colourless.
B. Dissolve about 0.1 g in dilute hydrochloric acid and dilute to 10 ml with water . 5 ml of the solution give reaction of calcium.TESTS
Matter insoluble in hydrochloric acid
Maximum 0.5 per cent.
Dissolve 2.0 g in 30 ml of hydrochloric acid. Boil the solution and filter. Wash the residue with hot water. The residue weighs a maximum of 10 mg.
Carbonates
Maximum 5.0 per cent of CaCO3.
Chlorides
Maximum 330 ppm.
Sulphates
Maximum 0.4 per cent.
Arsenic
Maximum 4 ppm.
Magnesium and alkali metals
Maximum 4.0 per cent calculated as sulphates.
Heavy metals
Maximum 20 ppm.ASSAY
To 1.500 g in a mortar, add 20-30 ml of water R and 0.5 ml of phenolphthalein solution. Titrate with 1 M hydrochloric acid by triturating the substance until the red colour disappears. The final solution is used in the tests for carbonates.
1 ml of 1 M hydrochloric acid is equivalent to 37.05 mg of Ca(OH)2.
Calcium Hydroxide USP Ca(OH)2 Grade Specifications
Calcium Hydroxide; Lime
Ca(OH)2 74.09
Calcium hydroxide [CAS 1305-62-0].
Calcium Hydroxide contains not less than 95.0 percent and not more than 100.5 percent of Ca(OH)2.
Packaging and storage Preserve in tight containers.
Identification
A: When mixed with from three to four times its weight of water, it forms a smooth magma. The clear, supernatant from the magma is alkaline to litmus.
B: Mix 1 g with 20 mL of water, and add sufficient 6 N acetic acid to effect solution: the resulting solution responds to the tests for Calcium.
Limit of acid-insoluble substances Dissolve 2.0 g in 30 mL of 4 N hydrochloric acid, and heat to boiling. Filter the mixture, wash the residue with hot water, and ignite: the weight of the residue does not exceed 10 mg (0.5%).
Carbonate Mix 2 g with 50 mL of water: the addition of an excess of 3 N hydrochloric acid to the mixture does not cause more than a slight effervescence.
Heavy metals Dissolve 2.0 g in 20 mL of 3 N hydrochloric acid, and evaporate on a steam bath to dryness. Dissolve the residue in 20 mL of water, and filter. Dilute the filtrate with water to 40 mL, and to 20 mL of the resulting solution add 1 mL of 0.1 N hydrochloric acid, then add water to make 25 mL: the limit is 20 6g per g.
Limit of magnesium and alkali salts Dissolve 0.50 g in a mixture of 30 mL of water and 10 mL of 3 N hydrochloric acid, and proceed as directed in the test for Magnesium and alkali salts under Calcium Carbonate, beginning with heat the solution, and boil for 1 minute. The weight of the residue does not exceed 12 mg (4.8%).
Assay Transfer about 1.5 g of Calcium Hydroxide, accurately weighed, to a beaker, and gradually add 30 mL of 3 N hydrochloric acid. When the solution is dissolved, transfer it to a 500-mL volumetric flask, rinse the beaker thoroughly, adding the rinsing to the flask, dilute with water to volume, and mix. Pipette 50 mL of the solution into a suitable container, add 100 mL of water, 15 mL of 1 N sodium hydroxide, and 300 mg of hydroxy naphthol blue, and titrate with 0.05 M edentate disodium VS to a blue endpoint. Each mL of 0.05 M edetate disodium is equivalent to 3.705 mg of Ca(OH)2.
Calcium Hydroxide FCC Food Grade Specifications
Slaked Lime
Calcium Hydroxide
Ca(OH)2 Formula weight 74.10
INS: 526 CAS 1305-62-0DESCRIPTION
Calcium Hydroxide occurs as a white powder. One gram dissolves in 630 mL of water at 25°, and in 1300 mL of boiling water. It is soluble in glycerin and in a saturated solution of sucrose but insoluble in alcohol.
Function: Buffer; neutralizing agent; firming agent.REQUIREMENTS
Identification
A. Mix a sample with from 3 to 4 times its weight of water. The sample forms a smooth magma. The clear, supernatant liquid from the magma is alkaline to litmus.
B. Mix 1 g of sample with 20 mL of water, and add sufficient glacial acetic acid to effect solution. The resulting solution gives positive tests for Calcium.
Assay: Not less than 95.0% and not more than 100.5% of Ca(OH)2.
Acid-Insoluble Substances: Not more than 0.5%.
Arsenic: Not more than 3 mg/kg.
Carbonate: Passes test.
Fluoride: Not more than 0.005%.
Lead: Not more than 2 mg/kg.
Magnesium and Alkali Salts: Not more than 4.8%.
Calcium Hydroxide ACS
Calcium Hydroxide
Ca(OH)2
Formula Weight 74.09
CAS Number 1305-62-0REQUIREMENTS
Assay: 95.0% Ca(OH)2 and 3.0% CaCO3MAXIMUM ALLOWABLE
Insoluble in hydrochloric acid: 0.03%
Chloride (Cl): 0.03%
Sulfur compounds (as SO4): 0.1%
Heavy metals (as Pb): 0.003%
Iron (Fe): 0.05%
Magnesium (Mg): 0.5%
Potassium (K): 0.05%
Sodium (Na): 0.05%
Strontium (Sr): 0.05%Calcium Hydroxide BP USP Slaked Lime Hydrated Lime Manufacturers;
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright and Usual Disclaimer is Applicable.
Last updated: 22 May, 2014.Global or International Calcium Hydroxide or Hydrated Lime or Slaked Lime IP BP USP NT FCC ACS Food Grade Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo itPerfection is made up of small thing but it is not small.
29-Apr-2022