Mubychem Group, established in 1976, is the pioneer manufacturer of Manganese Sulfate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter India Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Chemicals Container Leak Proof Drum Quick Delivery

Manganese Sulfate Sulphate BP Ph Eur USP ACS FCC Food Grade Manufacturers

MSDS of Manganese Sulfate Manganese Sulphate BP IP USP ACS Analytical Reagent FCC Food grade Manufacturers

Manganese Sulfate
Technical & Pure Crystals
CAS Number 10034-96-5 & 7785-87-7, IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Manganese Sulfate

Description & Specifications of Manganese Sulfate
Manganese Sulfate occurs as a pale-pink, granular powder. It is freely soluble in water, but is insoluble in alcohol.

Specification of Feed grade
Assay as MnSO4-H2O
: 98% min
Manganese (Mn): 31.8% min
Lead (Pb): 0.001% MAX
Arsenic (As): 0.0005% MAX
Chloride (Cl): 0.005% max
Water insoluble: 0.05% max
Fineness (pass 250μm): 95%

PACKING
HDPE laminated bags with liner 25/50 kgs. net or Jumbo bags with liner or as required by the buyer.

Manganese Sulphate Monohydrate BP
Manganese Sulphate BP

Manganese Sulphate Monohydrate BP Ph Eur Grade Specifications

MnSO4,H2O

DEFINITION
Content
99.0 per cent to 101.0 per cent (ignited substance).

CHARACTERS
Appearance
Pale pink crystalline powder, slightly hygroscopic.
Solubility
Freely soluble in water, practically insoluble in ethanol (96 per cent).

IDENTIFICATION
A. Solution S (see Tests) gives reaction of sulphates.
B. Dissolve 50 mg in 5 ml of water. Add 0.5 ml of ammonium sulphide solution. A pale pink precipitate is formed which dissolves on the addition of 1 ml of anhydrous acetic acid.
C. Loss on ignition (see Tests).

TESTS
Solution S
Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is not more opalescent than reference suspension.
Chlorides
Maximum 100 ppm.
Iron
Maximum 10 ppm, determined on solution S.
Zinc
Maximum 50 ppm.
Heavy metals
Maximum 20 ppm.
Loss on ignition
10.0 per cent to 12.0 per cent, determined on 1.00 g at 500 ± 50C.


Manganese Sulphate BP; Manganese Sulfate

Manganese Sulphate BP Ph Eur Grade Specifications

MnSO4-4H2O

DEFINITION
Manganese Sulphate is manganese(II) sulphate tetrahydrate. It contains not less than 98.0% and not more than 100.5% of MnSO4, calculated with reference to the substance ignited at 450 to 500C.

CHARACTERISTICS
Pale pink crystals or crystalline powder.
Freely soluble in water; practically insoluble in ethanol (96%).

IDENTIFICATION
A. Dissolve 0.5 g in 10 ml of water and add 1 ml of sodium sulphide solution. A pink precipitate is produced which is soluble in 6M acetic acid.
B. To 0.1 g add 2 g of lead-(IV) oxide and 5 ml of nitric acid , boil gently for a few minutes, add 100 ml of water and filter. A purple solution is produced.
C. Yields the reactions characteristic of sulphates.

TESTS
Arsenic
4 ppm
Heavy metals
40 ppm
Iron
40 ppm
Zinc
500 ppm
Chloride
330 ppm
Loss on ignition
When ignited to constant weight at 450° to 500°, loses 31.0 to 34.0% of its weight. Use 1 g.


Manganese Sulfate USP Grade Specifications

Manganese Sulfate USP
MnSO4·H2O 169.02
Sulfuric acid, manganese(2+) salt (1:1) monohydrate.
Manganese(2+) sulfate (1:1) monohydrate [CAS 10034-96-5]
Anhydrous 151.00 [CAS 7785-87-7]

Manganese Sulfate contains not less than 98.0 percent and not more than 102.0 percent of MnSO4·H2O.

Identification— A solution (1 in 10) responds to the tests for Manganese 191 and for Sulfate.
Loss on ignition— Ignite it at 450 to constant weight: it loses between 10.0% and 13.0% of its weight.
Substances not precipitated by ammonium sulfide— Dissolve 2.0 g in 90 mL of water, add 5 mL of ammonium hydroxide, warm the solution, and pass hydrogen sulfide through the solution for about 30 minutes. Dilute with water to 100 mL, mix, and allow the precipitate to settle. Decant the supernatant through a filter, transfer 50 mL of the clear filtrate to a tarred dish, evaporate to dryness, and ignite, gently at first and finally at 800 ± 25 : the weight of the residue does not exceed 5 mg (0.5%).


Manganese Sulfate FCC Food Grade Specifications

MnSO4-H2O Formula wt 169.02
CAS 7785-87-7

DESCRIPTION
Manganese Sulfate occurs as a pale-pink, granular powder. It is freely soluble in water, but is insoluble in alcohol.
Function: Nutrient.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Manganese and for Sulfate.
Assay: Not less than 98.0% and not more than 102.0% of MnSO4·H2O.
Arsenic: Not more than 3 mg/kg.
Lead: Not more than 4 mg/kg.
Loss on Heating: Between 10.0% and 13.0%.
Selenium: Not more than 0.003%. 


Manganese Sulfate Monohydrate ACS Reagent Grade Specifications

Reagent Chemicals
Manganese Sulfate ACS Specifications
Manganese Sulfate Monohydrate ACS
Manganese (II) Sulfate Monohydrate
Manganous Sulfate Monohydrate
MnSO4-H2O
Formula Weight 169.02
CAS Number 10034-96-5

REQUIREMENTS
Assay: 98.0-101.0% MnSO4-H2O
Loss on ignition: 10.0-12.0%
Substances reducing permanganate: Passes test

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 0.005%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.005%
Nickel (Ni): 0.02%
Potassium (K): 0.01%
Sodium (Na): 0.05%
Zinc (Zn): 0.005%
Heavy metals (as Pb): 0.002%
Iron (Fe): 0.002%

Manganese Sulphate BP Manganese Sulfate USP FCC ACS Analytical Reagent Food grade Sulfate manufacturers:

MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: us@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Aluminium Potassium Sulphate; Potash Alum  
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux Oil Field Chemicals

Manganese Sulfate Sulphate BP USP ACS AR Analytical Reagent FCC Food grade Manufacturers

Global or International Manganese Sulfate BP USP IP Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.

29-Apr-2022