Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Acetate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Zinc Acetate BP Ph Eur IP USP ACS Analytical Reagent Manufacturers
MSDS of Zinc Acetate BP IP USP ACS Analytical Reagent Manufacturers
Zinc Acetate
Technical & Pure
CAS Number 5970-45-6 & 557-34-6, IP BP Ph. Eur. USP ACS AR LR
Zinc Acetate BP Ph Eur Grade Specifications
C4H6O4Zn-2H2O
Action and use
Astringent
Preparation
Erythromycin and Zinc Acetate LotionDEFINITION
Content
99.0 per cent to 101.0 per cent of C4H6O4Zn-2H2OCHARACTERS
Appearance
White or almost white crystalline powder or flakes.
Solubility
Freely soluble in water, soluble in ethanol (96 per cent).IDENTIFICATION
A. It gives reaction of acetates.
B. It gives the reaction of zinc.TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
pH
5.8 to 7.0.
Dilute 10 ml of solution S to 20 ml with carbon dioxide-free water.
Reducing substances
Boil for 5 min a mixture of 10 ml of solution S, 90 ml of water R, 5 ml of dilute sulphuric acid and 1.5 ml of a 0.3 g/l solution of potassium permanganate. The pink colour of the solution remains.
Chlorides
Maximum 50 ppm.
Sulphates
Maximum 100 ppm, determined on solution S.
Aluminium
Maximum 5.0 ppm.
Atomic absorption spectrometry to pass the test.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Cadmium
Maximum 2.0 ppm.
Atomic absorption spectrometry to pass the test.
Copper
Maximum 50.0 ppm.
Atomic absorption spectrometry to pass the test.
Iron
Maximum 50.0 ppm.
Atomic absorption spectrometry to pass the test.
Lead
Maximum 10.0 ppm.
Atomic absorption spectrometry to pass the test.
Zinc Acetate Dihydrate USP Grade Specifications
C4H6O4Znˇ2H2O 219.51
Acetic acid, zinc salt, dihydrate.
Zinc acetate dihydrate [CAS Number 5970-45-6]
Anhydrous 183.48 [CAS Number 557-34-6]
Zinc Acetate contains not less than 98.0 percent and not more than 102.0 percent of C4H6O4Znˇ2H2O.Identification A solution (1 in 20) responds to the tests for Zinc and for Acetate.
pH: between 6.0 and 8.0, in a solution (1 in 20).
Insoluble matter A 20-g portion, dissolved in 150 mL of water containing 1 mL of glacial acetic acid, shows not more than 1.0 mg of insoluble matter (0.005%).
Arsenic: 3 ppm.
Lead (0.002%).
Chloride (0.005%).
Sulfate (0.010%).
Alkalies and alkaline earths (0.2%).
Zinc Acetate Dihydrate ACS Reagent Grade Specifications
Zinc Acetate Dihydrate
(CH3COO)2Zn-2H2O
Formula Weight 219.51
CAS Number 5970-45-6REQUIREMENTS
Assay
98.0-101.0% (CH3COO)2Zn . 2H2O
pH of a 5% solution
6.0-7.0 at 25C
MAXIMUM ALLOWABLE
Insoluble matter
0.005%
Chloride (Cl)
5 ppm
Sulfate (SO4)
0.005%
Calcium (Ca)
0.005%
Magnesium (Mg)
0.005%
Potassium (K)
0.01%
Sodium (Na)
0.05%
Iron (Fe)
5 ppm
Lead (Pb)
0.002%
Zinc Acetate BP USP ACS Analytical Reagent Manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright and Usual Disclaimer is Applicable.
Global or International Zinc Acetate BP IP USP FCC Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo itPerfection is made up of small thing but it is not small.
30-Apr-2022