Mubychem Group, established in 1976, is the pioneer manufacturer of Calcium Carbonate Precipitated and Directly Compressible, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter India Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Chemicals Container Leak Proof Drum Quick Delivery

Calcium Carbonate USP BP Ph Eur FCC ACS Reagetn Grade Manufacturers, Precipitated Coated and Directly Compressible Calcium Carbonate

MSDS; Calcium Carbonate BP USP IP ACS FCC Food grade Manufacturers

Calcium Carbonate
Precipitated Coated & Directly Compressible
CAS Number 471-34-1, IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Calcium Carbonate

Calcium Carbonate USP Grade Specifications

CaCO3 100.09
Carbonic acid, calcium salt (1:1)

Calcium Carbonate, dried at 200 for 4 hours, contains calcium equivalent to not less than 98.0 percent and not more than 100.5 percent of CaCO3.

Packaging and storage— Preserve in well-closed containers.
Identification— The addition of acetic acid to it produces effervescence (presence of carbonate), and the resulting solution, after boiling, responds to the tests for Calcium.
Loss on drying— Dry it at 200 for 4 hours: it loses not more than 2.0% of its weight.
Acid-insoluble substances— Mix 5.0 g with 10 mL of water, and add hydrochloric acid, drop wise, with agitation, until it ceases to cause effervescence, then add water to make the mixture measure 200 mL, and filter. Wash the insoluble residue with water until the last washing shows no chloride, and ignite: the weight of the residue does not exceed 10 mg (0.2%).
Limit of fluoride— The limit is 0.005%.
Arsenic— The limit is 3 ppm.
Barium— A platinum wire, dipped in the filtrate obtained in the test for Acid-insoluble substances and held in a non-luminous flame, does not impart a green color.
Lead —the limit is 3 ppm.
Iron— To pass the test
Mercury— the limit is 0.5 ΅g per g.
Limit of magnesium and alkali salts— Mix 1.0 g with 35 mL of water, carefully add 3 mL of hydrochloric acid, heat the solution, and boil for 1 minute. Rapidly add 40 mL of oxalic acid TS, and stir vigorously until precipitation is well established. Add immediately to the warm mixture 2 drops of methyl red TS and then 6 N ammonium hydroxide, drop wise, until the mixture is just alkaline. Cool to room temperature, transfer to a 100-mL graduated cylinder, dilute with water to 100 mL, mix, and allow to stand for 4 hours or overnight. Filter, and to 50 mL of the clear filtrate in a platinum dish add 0.5 mL of sulfuric acid, and evaporate the mixture on a steam bath to a small volume. Carefully heat over a free flame to dryness, and continue heating to complete decomposition and volatilization of ammonium salts. Finally ignite the residue to constant weight.
The weight of the residue does not exceed 5 mg (1.0%).
Heavy metals— the limit is 0.002%.
Organic volatile impurities— meets the requirements.


Calcium Carbonate BP Grade Specifications.

CaCO3 -- 100
Action and use
Antacid.
Preparations
CaCO3 Chewable Tablets
Calcium and Colecalciferol Tablets

DEFINITION
Content
98.5 per cent to 100.5 per cent (dried substance).

CHARACTERS
Appearance
White or almost white powder.
Solubility
Practically insoluble in water.

IDENTIFICATION
A. It gives the reaction of carbonates
B. 0.2 ml of solution S (see Tests) gives the reactions of calcium

TESTS
Solution S
Dissolve 5.0 g in 80 ml of dilute acetic acid R . When the effervescence ceases, boil for 2min. Allow to cool, dilute to 100 ml with dilute acetic acid R and filter, if necessary, through a sintered-glass filter.
Substances insoluble in acetic acid
Maximum 0.2 per cent.
Chlorides
Maximum 330 ppm.
Sulphates
Maximum 0.25 per cent.
Arsenic
Maximum 4 ppm, determined on 5 ml of solution S.
Barium
To 10 ml of solution S add 10 ml of calcium sulphate solution R . After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 10 ml of solution S and 10 ml of distilled water R.
Iron
Maximum 200 ppm.
Magnesium and alkali metals
Maximum 1.5 per cent.
Heavy metals
Maximum 20 ppm.


Calcium Carbonate FCC Food Grade Specifications as per US Food Chemical Codex

CaCO3 Formula weight 100.09
CAS Number 471-34-1

DESCRIPTION
Calcium Carbonate occurs as a fine, white or colorless, microcrystalline powder. It is stable in air, and it is practically insoluble in water and in alcohol. The presence of any ammonium salt or carbon dioxide increases its solubility in water, but the presence of any alkali hydroxide reduces the solubility.
Function: pH control agent; nutrient; dough conditioner; firming agent; yeast nutrient.

REQUIREMENTS
Identification: A sample dissolves, with effervescence, in 1 N acetic acid, in 2.7 N hydrochloric acid, and in 1.7 N nitric acid, and the resulting solutions, after boiling, give positive tests for Calcium.
Assay: Not less than 98.0% and not more than 100.5% of CaCO3 after drying.
Acid-Insoluble Substances: Not more than 0.2%.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.005%.
Lead: Not more than 3 mg/kg.
Loss on Drying: Not more than 2%.
Magnesium and Alkali Salts: Not more than 1%.


Calcium Carbonate ACS ReagentGrade Specifications

American Chemical Society Reagent Grade
Calcium Carbonate
CaCO3
Formula Wt 100.09
CAS Number 471-34-1

REQUIREMENTS

Assay (dried basis)

99.0% CaCO3 min

MAXIMUM ALLOWABLE

Insoluble in dilute hydrochloric acid

0.01%

Ammonium hydroxide precipitate

0.01%

Chloride (Cl)

0.001%

Sulfate (SO4) 0.0015%

Ammonium (NH4)

0.003%

Barium (Ba)

0.01%

Heavy metals (as Pb)

0.001%

Iron (Fe)

0.003%

Magnesium (Mg)

0.02%

Potassium (K)

0.01%

Sodium (Na)

0.1%

Strontium (Sr)

0.1%

 

  Precipitated & Directly Compressible Calcium Carbonate BP USP IP FCC ACS Manufacturers at:

MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: us@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux  

Calcium Carbonate IP BP USP ACS FCC Food grade Manufacturers

Global or International Calcium Carbonate Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.

29-Apr-2022